Tools on hanging cardboard (57)
Products (57)
D 081 EX
Norme:  ISO 5745 EN 60900
Half-round extra-long nose pliers with straight jaws - 1000 V
• Suitable for gripping and cutting operations in precision engineering
• Pointed nose with knurled gripping surface
• Additional induction hardening on cutting edges
• Ideal to cut soft, semi-hard and hard wire
• Open hinge with forged joint
• Insulated ergonomic bimaterial grip
• Hanging holes at the ends for safety lock systems
• Protective enamelled finish
• Each one is tested according to the European standard EN 60900 to ensure safe work
• IMQ Certification
• Pointed nose with knurled gripping surface
• Additional induction hardening on cutting edges
• Ideal to cut soft, semi-hard and hard wire
• Open hinge with forged joint
• Insulated ergonomic bimaterial grip
• Hanging holes at the ends for safety lock systems
• Protective enamelled finish
• Each one is tested according to the European standard EN 60900 to ensure safe work
• IMQ Certification
D 085 EX
Norme:  ISO 5746 EN 60900
Combination pliers - 1000 V
• Nose with knurled inner surface to grip flat material
• Knurled gripping area to hold round material
• Additional induction hardening on cutting edges
• Ideal to cut soft, semi-hard and hard wire
• Open hinge with forged joint
• Insulated ergonomic bimaterial grip
• Hanging holes at the ends for safety lock systems
• Protective enamelled finish
• Each one is tested according to the European standard EN 60900 to ensure safe work
• IMQ Certification
• Knurled gripping area to hold round material
• Additional induction hardening on cutting edges
• Ideal to cut soft, semi-hard and hard wire
• Open hinge with forged joint
• Insulated ergonomic bimaterial grip
• Hanging holes at the ends for safety lock systems
• Protective enamelled finish
• Each one is tested according to the European standard EN 60900 to ensure safe work
• IMQ Certification
D 087 EX
Norme:  ISO 5749 EN 60900
Diagonal cutting nippers - 1000 V
• Lengthened and pointed head
• Clean and precise cut even on the extremities of cutting edges
• Additional induction hardening on cutting edges
• Ideal to cut soft, semi-hard and hard wire
• Fulcrum closer to the cutting edge to reduce effort during cutting operations
• Open hinge with forged joint
• Insulated ergonomic bimaterial grip
• Hanging holes at the ends for safety lock systems
• Protective enamelled finish
• Each one is tested according to the European standard EN 60900 to ensure safe work
• IMQ Certification
• Clean and precise cut even on the extremities of cutting edges
• Additional induction hardening on cutting edges
• Ideal to cut soft, semi-hard and hard wire
• Fulcrum closer to the cutting edge to reduce effort during cutting operations
• Open hinge with forged joint
• Insulated ergonomic bimaterial grip
• Hanging holes at the ends for safety lock systems
• Protective enamelled finish
• Each one is tested according to the European standard EN 60900 to ensure safe work
• IMQ Certification
D 091
Norme:  ISO 2380 EN 60900
Screwdrivers for slot-head screws - 1000 V
• Silicon, Manganese and Molybdenum steel blade with phosphatized finish
• Insulated ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle to identify the different shapes
• Each screwdriver is tested according to the European standard EN 60900 to guarantee safe working
• IMQ Certification
• Insulated ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle to identify the different shapes
• Each screwdriver is tested according to the European standard EN 60900 to guarantee safe working
• IMQ Certification
D 091 PH
Norme:  ISO 8764 DIN 5260
Screwdrivers for PHILLIPS® screws - 1000 V
• Silicon, Manganese and Molybdenum steel blade with phosphatized finish
• Insulated ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle to identify the different shapes
• Each one is tested according to the European standard EN 60900 to ensure safe work
• IMQ Certification
• Insulated ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle to identify the different shapes
• Each one is tested according to the European standard EN 60900 to ensure safe work
• IMQ Certification
Curved pliers with extra-long half-round jaws
- Body curved with respect to the axis of the handle for a more comfortable front grip
- Greater visibility to the task in hand
- Knurled gripping surface: length 32 mm
- Shaped jaws for perfect gripping even on round surfaces
- Integrated cutter for hard wire
- Box-joint with internal spring
- Ergonomic handles sheathed in anti-slip material
- Greater visibility to the task in hand
- Knurled gripping surface: length 32 mm
- Shaped jaws for perfect gripping even on round surfaces
- Integrated cutter for hard wire
- Box-joint with internal spring
- Ergonomic handles sheathed in anti-slip material
D 127 N
Norme:  UNI 7914 DIN 5256
Pliers with straight nose for internal circlips
• Precision model
• Spring steel tips inserted into the nose: longer life compared to the standard tips
• Support surface of the rings between the tips and the nose
• Spring integrated in the body
• Handles sheathed in anti-slip PVC
• Protective enamelled finish
• Spring steel tips inserted into the nose: longer life compared to the standard tips
• Support surface of the rings between the tips and the nose
• Spring integrated in the body
• Handles sheathed in anti-slip PVC
• Protective enamelled finish
D 127 PN
Norme:  UNI 7914 DIN 5256
Pliers with nose bent at 90° for internal circlips
• Precision model
• Piano wire tips inserted into the nose: longer life compared to the standard tips
• Support surface of the rings between the tips and the nose
• Spring integrated in the body
• Handles sheathed in anti-slip PVC
• Protective enamelled finish
• Piano wire tips inserted into the nose: longer life compared to the standard tips
• Support surface of the rings between the tips and the nose
• Spring integrated in the body
• Handles sheathed in anti-slip PVC
• Protective enamelled finish
D 128 N
Norme:  UNI 7915 DIN 5254
Pliers with straight nose for external circlips
• Precision model
• Piano wire tips inserted into the nose: longer life compared to the standard tips
• Support surface of the rings between the tips and the nose
• Spring integrated in the body
• Handles sheathed in anti-slip PVC
• Protective enamelled finish
• Piano wire tips inserted into the nose: longer life compared to the standard tips
• Support surface of the rings between the tips and the nose
• Spring integrated in the body
• Handles sheathed in anti-slip PVC
• Protective enamelled finish
D 128 PN
Norme:  UNI 7915 DIN 5254
Pliers with nose bent at 90° for external circlips
• Precision model
• Piano wire tips inserted into the nose: longer life compared to the standard tips
• Support surface of the rings between the tips and the nose
• Spring integrated in the body
• Handles sheathed in anti-slip PVC
• Protective enamelled finish
• Piano wire tips inserted into the nose: longer life compared to the standard tips
• Support surface of the rings between the tips and the nose
• Spring integrated in the body
• Handles sheathed in anti-slip PVC
• Protective enamelled finish
D 133 AX
Norme:  ISO 5745
Half-round extra-long nose pliers with straight jaws
- Suitable for gripping and cutting operations in precision engineering
- Pointed nose with knurled gripping surface
- Additional induction hardening on cutting edges
- Ideal to cut soft, semi-hard and hard wire
- Open hinge with forged joint
- Ergonomic bimaterial grip
- Hanging holes at the ends for safety lock systems
- Chrome plated finish
- Pointed nose with knurled gripping surface
- Additional induction hardening on cutting edges
- Ideal to cut soft, semi-hard and hard wire
- Open hinge with forged joint
- Ergonomic bimaterial grip
- Hanging holes at the ends for safety lock systems
- Chrome plated finish
Half-round extra-long nose pliers with jaws at 45°
- Suitable for gripping and cutting operations in precision engineering
- Pointed nose with knurled gripping surface
- Additional induction hardening on cutting edges
- Ideal to cut soft, semi-hard and hard wire
- Open hinge with forged joint
- Ergonomic bimaterial grip
- Hanging holes at the ends for safety lock systems
- Chrome plated finish
- Pointed nose with knurled gripping surface
- Additional induction hardening on cutting edges
- Ideal to cut soft, semi-hard and hard wire
- Open hinge with forged joint
- Ergonomic bimaterial grip
- Hanging holes at the ends for safety lock systems
- Chrome plated finish
D 150 AX
Norme:  ISO 5746
Combination pliers
- Nose with knurled inner surface to grip flat material
- Knurled gripping area to hold round material
- Additional induction hardening on cutting edges
- Ideal to cut soft , semi-hard and hard wire
- Open hinge with forged joint
- Ergonomic bimaterial grip
- Hanging holes at the ends for safety lock systems
- Chrome plated finish
- Knurled gripping area to hold round material
- Additional induction hardening on cutting edges
- Ideal to cut soft , semi-hard and hard wire
- Open hinge with forged joint
- Ergonomic bimaterial grip
- Hanging holes at the ends for safety lock systems
- Chrome plated finish
D 180 B
Norme:  ISO 8976
Semiautomatic adjustable pliers
- Integrated regulation button
- 12-position model
- Quick and precise rack
- Box-joint system
- Self-locking
- High frequency treatment of the jaws
- Steel body totally forged
- Burnished with protective enamelled finish
- Ergonomic handles studied to apply extreme force
D 182 AX
Norme:  ISO 5748
End cutting nippers
- Additional induction hardening on cutting edges
- Ideal to cut soft, semi-hard and hard wire
- Fulcrum closer to the cutting edge to reduce effort during cutting operations
- Open hinge with forged joint
- Ergonomic bimaterial grip
- Hanging holes at the ends for safety lock systems
- Chrome plated finish
- Ideal to cut soft, semi-hard and hard wire
- Fulcrum closer to the cutting edge to reduce effort during cutting operations
- Open hinge with forged joint
- Ergonomic bimaterial grip
- Hanging holes at the ends for safety lock systems
- Chrome plated finish
D 185 AX
Norme:  ISO 5749
Diagonal cutting nippers
- Lengthened and pointed head
- Clean and precise cut even on the extremities of cutting edges
- Additional induction hardening on cutting edges
- Ideal to cut soft, semi-hard and hard wire
- Fulcrum closer to the cutting edge to reduce effort during cutting operations
- Open hinge with forged joint
- Ergonomic bimaterial grip
- Hanging holes at the ends for safety lock systems
- Chrome plated finish
- Clean and precise cut even on the extremities of cutting edges
- Additional induction hardening on cutting edges
- Ideal to cut soft, semi-hard and hard wire
- Fulcrum closer to the cutting edge to reduce effort during cutting operations
- Open hinge with forged joint
- Ergonomic bimaterial grip
- Hanging holes at the ends for safety lock systems
- Chrome plated finish
D 235 1/2 EN
Norme:  ISO 2725-1
Hexagonal sockets
- Special Chrome Molybdenum steel
- Chrome plated finish
D 237 A 1/2
Norme:  ISO 3315
Reversible ratchet with sealed mechanism (certified IP51)
- Model with 72 teeth and angle of action of 5°
- Knob-turn reversal system
- Sealed mechanism certified IP51
- Higher resistance in comparison to standard ratchets, because of the new patented pawl
- Forged steel body with double T section: lightness and resistance
- Conical bimaterial handle for safe and perfect grip
- Handle with hole for hanging on tool-holding panels
- Chrome plated finish
D 237 A 1/4
Norme:  ISO 3315
Reversible ratchet with sealed mechanism (certified IP51)
- Model with 72 teeth and angle of action of 5°
- Knob-turn reversal system
- Sealed mechanism certified IP51
- Higher resistance in comparison to standard ratchets, because of the new patented pawl
- Forged steel body with double T section: lightness and resistance
- Conical bimaterial handle for safe and perfect grip
- Handle with hole for hanging on tool-holding panels
- Chrome plated finish
- Knob-turn reversal system
- Sealed mechanism certified IP51
- Higher resistance in comparison to standard ratchets, because of the new patented pawl
- Forged steel body with double T section: lightness and resistance
- Conical bimaterial handle for safe and perfect grip
- Handle with hole for hanging on tool-holding panels
- Chrome plated finish
D 324
Norme:  ISO 2380
Screwdrivers for slot-head screws
• Zinc-plated tip for high resistance to wear and corrosion
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
D 324 D
Norme:  ISO 2380
Screwdrivers for slot-head screws
• For driving recessed studs or screws
• Zinc-plated tip for high resistance to wear and corrosion
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
• Zinc-plated tip for high resistance to wear and corrosion
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
D 324 E
Norme:  ISO 2380
Screwdrivers for slot-head screws
• Model with hexagonal drive and hexagonal blade for powerful tightening, also with a wrench
• Zinc-plated tip for high resistance to wear and corrosion
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
• Zinc-plated tip for high resistance to wear and corrosion
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
D 324 EPH
Norme:  ISO 8764
Screwdrivers for PHILLIPS® screws
• Model with hexagonal drive and hexagonal blade for powerful tightening, also with a wrench
• Zinc-plated tip for high resistance to wear and corrosion
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
• Zinc-plated tip for high resistance to wear and corrosion
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
D 324 H
Norme:  ISO 2380-1
Screwdrivers with beating zone for slot-head screws
• Model with hexagonal drive and hexagonal blade for powerful tightening, also with a wrench
• Metal rear dome to protect the beating zone
• Zinc-plated tip for high resistance to wear and corrosion
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
• Metal rear dome to protect the beating zone
• Zinc-plated tip for high resistance to wear and corrosion
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
Screwdrivers with beating zone for PHILLIPS® screws
• Model with hexagonal drive and hexagonal blade for powerful tightening, also with a wrench
• Metal rear dome to protect the beating zone
• Zinc-plated tip for high resistance to wear and corrosion
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
• Metal rear dome to protect the beating zone
• Zinc-plated tip for high resistance to wear and corrosion
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
D 324 L
Norme:  ISO 2380
Screwdrivers for slot-head screws
• Model with long blade
• Zinc-plated tip for high resistance to wear and corrosion
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
• Zinc-plated tip for high resistance to wear and corrosion
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
D 324 LPH
Norme:  ISO 8764
Screwdrivers for PHILLIPS® screws
• Model with long blade
• Zinc-plated tip for high resistance to wear and corrosion
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
• Zinc-plated tip for high resistance to wear and corrosion
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
D 324 N
Norme:  ISO 2380
Screwdrivers for slot-head screws
• Stubby model
• Zinc-plated tip for high resistance to wear and corrosion
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
• Zinc-plated tip for high resistance to wear and corrosion
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
D 324 NPH
Norme:  ISO 8764
Screwdrivers for PHILLIPS® screws
• Stubby model
• Zinc-plated tip for high resistance to wear and corrosion
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
• Zinc-plated tip for high resistance to wear and corrosion
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
D 324 PH
Norme:  ISO 8764
Screwdrivers for PHILLIPS® screws
• Zinc-plated tip for high resistance to wear and corrosion
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
D 324 PZ
Norme:  ISO 8764
Screwdrivers for POZIDRIV®-SUPADRIV® screws
• Zinc-plated tip for high resistance to wear and corrosion
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
Screwdrivers for TORX® Tamper Resistant screws
• For safety screws
• Zinc-plated tip for high resistance to wear and corrosion
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes
• Zinc-plated tip for high resistance to wear and corrosion
• Chrome Silicon Vanadium steel blade for excellent resistance to flexion
• Ergonomic three-material grip with soft coating, resistant to oils and chemicals
• Colour code on the handle for quick identification of the different shapes